Anyma DMX on Windows

A place where updates of QLC+ activities and technical articles are posted as if it was a blog
Post Reply
User avatar
mcallegari
Posts: 4807
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

While working on another topic, I reworked a bit the udmx plugin, which is the one needed to support Anyma DMX (and clones) devices on QLC+.
Basically I found that with a minimum effort I could have the same code working on Linux and Windows (and hopefully macOS...which is the reason of this whole task)

Windows doesn't give you full access to USB devices unless they are recognized/certified devices with a driver.
So when you plug an Anyma device in, Windows will map it as an unusable COM port.
Luckily, there is a tool called Zadig (download here) which can fix USB mess for you.
You just need to download it, run it (no installation is required), select the Anyma device and replace the serial driver that Windows installed.
See screenshot
zadig_udmx_windows.png
Wait a few long seconds and that's it!
After this magic and with a patched QLC+ version, you will have uDMX working on Windows too!

For those interested in make some tests, Windows test version 4.12.5.108 includes the necessary changes
Top
User avatar
GGGss
Posts: 3141
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Thank you Massimo,
Yesterday I seriously was struggling with unresponsive touch screens (3) when a device was connected.
With the help of Zadig I now get a clear overview of what is going on. Windows messed up with USB hubs and not connected devices.
ScreenHunter_34 Jan. 07 09.44.png
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
markzvo
Posts: 91
Joined: Sat Jan 28, 2017 1:52 am
Real Name: Mark Z

Just tried this on Windows 11 Pro and can confirm this tool works to bring a cheap $10 USB DMX adapter to a working state in QLC+ ! :)
Top
Post Reply

Return to “Blog”