RGBmatrix vs Led Rings mode?

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
giacomo
Posts: 553
Joined: Tue May 26, 2015 6:17 pm
Real Name:

hello,
I've patched some fixtures with the option to use the led rings (BT-ORBIT 27ch.mode) and I've noticed that the RGBmatrix uses only one ring, to be precise the last one in the channel list.
Does someone knows a way to use all the rgb leds in the RGBmatrix? Is it a qlc+ limitation?
I've written the library and the fixtures work well, I've uploaded it in the forum, I could change the mode but I need this controll over the rings.
Thanks in advance for any answer.
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

I checked your definition and there are no heads defined. The fixture mimics 3 heads in 27ch mode - ergo the fixture definition should have 3 heads included.
Now the matrix will do its trick.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
giacomo
Posts: 553
Joined: Tue May 26, 2015 6:17 pm
Real Name:

thanks, I'll correct it later.
Top
giacomo
Posts: 553
Joined: Tue May 26, 2015 6:17 pm
Real Name:

it didn't work:
the bt-orbit in 27 ch. has a master dimmer and 3 ring dimmers, I've put these ring dimmers in the head definition too with the rgb rings, could you have a look at it again? thanks
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Solved in the other thread?
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “Generic”