no input option with DMXKing Micro USB

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
afriend1
Posts: 2
Joined: Sun Sep 05, 2021 8:25 pm
Real Name:

I'm using QLC+ with a DMXKing micro USB and the input doesn't show up as an input option. The specifications say its' bidirectional, so I assume both options should be there. I'm new to DMX, so I may be doing something wrong.
Top
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

To be honest I've never used it as input.
You might try to force to "open RX" protocol via settings dialog, but I'm not sure if it will work
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

I guessed so ...
ScreenHunter_24 Sep. 08 09.53.png
ScreenHunter_24 Sep. 08 09.53.png (6.22 KiB) Viewed 186 times
You have to alter your device to work as an input...

[edit] I'm not sure this works ... I did study the documentation, but couldn't find 'the switch' to change from output to input device[/edit]
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “Generic”