Hello everyone
I managed to create a light show with the software last year on the Disney theme, but now I will want to integrate WS2801 type addressable LEDs into this show.
How can I do it? rather use Arduino or Raspberry Pi and if someone had a little tutorial it would be cool.
thank you
WS2801 type addressable LEDs
-
pandas
- Posts: 15
- Joined: Wed Aug 18, 2021 6:11 pm
- Real Name:
I recommend WLED firmware for starters. Very easy. It supports artnet, e131, and other protocols.
https://github.com/Aircoookie/WLED
There's a lot of info out there on how to wire up the controllers and there are also sources for preassembled units.
https://faveleds.com/
https://www.holidaycoro.com/
As far as integrating with QLC+, you can leverage rgb panel / rgb matrix features out of the box.
https://www.youtube.com/watch?v=ovr3CSSbfgY
https://github.com/Aircoookie/WLED
There's a lot of info out there on how to wire up the controllers and there are also sources for preassembled units.
https://faveleds.com/
https://www.holidaycoro.com/
As far as integrating with QLC+, you can leverage rgb panel / rgb matrix features out of the box.
https://www.youtube.com/watch?v=ovr3CSSbfgY