I have created this moving head profile but I am unable to get the pixel portion of the moving head to work. Looking at the simple desk its not holding the master dimmer channel. Attached is the profile if someone can help. The fixture looks like the one in this link below.
https://www.dhgate.com/product/new-circ ... d4QAvD_BwE
19 15w led moving head
-
Krsound
- Posts: 142
- Joined: Sun May 31, 2015 4:42 am
- Location: USA
- Real Name: Kyle Sims
- Contact:
- Attachments
-
KRS-19-15w-Zoom-Moving-Head.qxf- (4.92 KiB) Downloaded 111 times
-
GGGss
- Posts: 3152
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
A DMX chart would help
Don't use master dimmer inside your 'heads' structure.
Changed the definition in the annex.
(I think you will have to refine shutter (f.i. slow to fast, swell, ...) and other channels I had a quick look into)
Don't use master dimmer inside your 'heads' structure.
Changed the definition in the annex.
(I think you will have to refine shutter (f.i. slow to fast, swell, ...) and other channels I had a quick look into)
- Attachments
-
- KRS-19-15w-Zoom-Moving-Head.qxf
- (4.85 KiB) Downloaded 107 times
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
Krsound
- Posts: 142
- Joined: Sun May 31, 2015 4:42 am
- Location: USA
- Real Name: Kyle Sims
- Contact:
Attached is the dmx channel list
- Attachments
-
- LED Wash Zoom 19x15W.pdf
- (286.7 KiB) Downloaded 165 times
-
GGGss
- Posts: 3152
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
LOL ... they did a fabulous job creating and translating a sheet of paper that is supposed to be a manual.
Good luck with your 400W, enough power
Good luck with your 400W, enough power
All electric machines work on smoke... when the smoke escapes... they don't work anymore