how to trigger linux command with a QLC cue?

[shivahoj]

Hello, I bought the awesome Radiator ILDA laser controller(https://www.neoncaptain.com/#/), and want to control ist via the built-in network port, or its MIDI ports.
Since most of the MIDI commands to change settings, or select laser patterns, are NRPN Adresses(Non-Registered Parameter Numbers), and I don't know how to create those in QLC, I found out how to send those commands via a connected network cable.

I would create simple button-press&release files in linux(the QLC system runs on linux) that, when sent to the radiator, do the trick.
one such file would look like:

Code: Select all

s 23 true
s 23 false

for pressing and releasing button 23.
This would be sent to the radiator via cat and netcat to the radiator port 4815 on IP 10.0.0.23:

Code: Select all

cat ./se23 |nc 10.0.0.23 4815

My Question is:
How can I fire up a linux shell script containing the above one-liner with a QLC+ cue?l

[mcallegari]

With a Script function
https://www.qlcplus.org/docs/html_en_EN ... ditor.html