Update 1.
The problem is that when i use u button for pan/tilt (LTP) the button stay active (in the tutorial this is different) in the VC
- LTP channels.jpg (5.02 KiB) Viewed 307 times
Reset all button VC
-
Gjohan
- Posts: 1
- Joined: Mon Aug 31, 2015 7:13 am
- Real Name: Gjohan
In tutorial 7 (effect and position) there is a reset all button in VC. Can someone explain how create this button and how it should work(connect to reset all scene ?).
Update 1.
The problem is that when i use u button for pan/tilt (LTP) the button stay active (in the tutorial this is different) in the VC
Update 1.
The problem is that when i use u button for pan/tilt (LTP) the button stay active (in the tutorial this is different) in the VC
-
questionmark
- Posts: 16
- Joined: Fri Dec 21, 2018 3:43 pm
- Location: Kansas City
- Real Name:
I think you are just wanting your buttons to flash the scene instead of toggling the functions. Open the button properties, for your Heads Up and Heads Front buttons, and change the "On button press" value to "Flash function".