USB Controller not recognized

Ask a question related to the QLC+ 5.x usage here.
Provide as much details as you can, especially what you would like to achieve and if available, a sample workspace of your work in progress
Post Reply
Adlet
Posts: 2
Joined: Fri Oct 30, 2020 6:05 pm
Real Name:

Using a DMX USB purchased off of Amazon. I see the USB :

Bus 001 Device 013: ID 16c0:05dc Van Ooijen Technische Informatica shared ID for use with libusb

...but QLC shows nothing listed. What else can I try?
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Adlet wrote: ↑Fri Oct 30, 2020 6:10 pm Van Ooijen Technische Informatica
The poor guy did a lot of work creating a controller and every Asian copier used the code. To my knowledge, it is a DMX v1.0 board (old and has known problems)
Anyway - is it supported? https://www.qlcplus.org/features.html - No...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Adlet
Posts: 2
Joined: Fri Oct 30, 2020 6:05 pm
Real Name:

OK. So there is some sort of in fighting I'm not aware of then? That's why it's not supported?

It works with FreeStyler X2 just fine. Guess I'll use that instead.
Top
janosvitok
Posts: 1325
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

Most probably it is not supported because:
- it is not compatible with something already supported
- the developer does not have access to the device and/or time to implement support and/or demand is not big enough to invest time in implementing support
Top
Post Reply

Return to “QLC+ 5 Usage questions”