I read a lot in the manual this week and stumbled upon this thread and hope i did everything right.
How to get it to work:
Add .qxi to InputProfile Folder and .qxm to MidiTemplates Folder.
Restart QLC
Doubleclick one MIDI-Device in Input/Output Tab. On Output->MIDIOUT* (LPMini...) -> Select Launchpad Developer Mode as InitMessage.
In your Universe of Choice set MIDIIN of Focusrite as Input and MIDIOUT as Return Channel. As soon as you select Return Channel all the LED should turn black.
Switch to Profile Tab on top and Select the LaunchpadMini.
Thats it.
You can Manually enable Programmer Mode by: Longpress Session and after That hit Stop/Solo/Mute.
Default on/off values are set to white/black, but can be customized in the profile or in the Virtual Console by selecting "custom returnvalue?" (sry, i have the german version installed....)
This Image represents the possible Colors, mutiply by 2 when using (because Midi has 128 Channels and DMX has 256).
Manual: https://fael-downloads-prod.focusrite.c ... Manual.pdf
The only think i havn't found out is how to set flashing or pulsing colors. The manual (Page12) says to use channel 2 or 3 for this, but i didn't manage to get it working.
Have fun
