moving heads xy pad

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
tricot
Posts: 118
Joined: Sun Aug 06, 2017 5:17 pm
Location: Lisboa, Portugal
Real Name: santiago

sorry friends
but i have another problem:
i have 2 moving head on the xy pad when use the number 1 the pan and tilt it's ok
when i use the moving head 2 the tilt it's ok but the pan moves only the channel PAN FINE and not the pan fine and pan

help
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Do they both have the same fixture definition?
If not there is a problem in the definition (both PAN channels are set to fine)

Can you verify with the DMX monitor what is going on?
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
tricot
Posts: 118
Joined: Sun Aug 06, 2017 5:17 pm
Location: Lisboa, Portugal
Real Name: santiago

They are two different fixtures :
one in adress 400 and the other in 420

and on the monitor I only see that the tray moves pan fine but not the pan
Top
User avatar
mcallegari
Posts: 4712
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

Most likely the fixture defintion is wrong. You have set pan fine twice.
Top
Post Reply

Return to “Generic”