RGB Matrix Intensity via Chase?
-
sandinak
- Posts: 191
- Joined: Mon Apr 03, 2017 5:40 pm
- Location: Yorktown, VA
- Real Name: Branson Matheson
- Contact:
I use chasers to cue our shows .. which works well .. however I've run into a fun issue.. was wondering if anyone had come up with a solution? How to set a "level" for an "RGB Matrix" in a Chase sequence? I have ~10k LEDs across ~48 DMX universes on steps .. and I have some neat matrix displays used across them. I know I can use 'Fade In' and 'Fade Out' .. and do heavily .. to control some brightness .. and I have create a Channel Control for the devices to control relative levels which will override what the matrix is sending .. but I can't find a way to "cue" a relative level for the matrix? EG .. set an intensity for the Matrix. Any ideas?
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
dim levels set to full and use a submaster to control the brightness?
If the submaster is bound to a channel in a loopback universe you can set it's level inside a cue...
If the submaster is bound to a channel in a loopback universe you can set it's level inside a cue...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
sandinak
- Posts: 191
- Joined: Mon Apr 03, 2017 5:40 pm
- Location: Yorktown, VA
- Real Name: Branson Matheson
- Contact:
Hmm .. that might work .. i'll give it a try .. the other thing i've been doing is just creating matrix's with the required levels .. but it would be nice to be able to do it independently 