is possible run scene over all other scenes, who is running, temporarily disabling them.
I need run strobo scene over all other ssenes
run scene over all other scenes?
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
How have to rely on the HTP or LTP mechanism to work
If strobe is a separate channel in your fixture this will work. If the strobe is within the intensity channel range - you are in a problem...
I had a quick peek at your project and I can say that you have to separate everything.
statics:
intensities
colors
positions
gobos
dynamics:
intensity chasers
color chasers
EFX:
...
In that way adding something to something other won't interfere with each other.
Take cue strobo0:
Inside all channels are present ... this is bad because you will rely on HTP and LTP priorities. (After pressing your flash button - the fixtures do not know what to do because they lack 'new' information.
If you had separate the statics and dynamics - the strobe function would ONLY set the intensity channel to strobe.
If strobe is a separate channel in your fixture this will work. If the strobe is within the intensity channel range - you are in a problem...
I had a quick peek at your project and I can say that you have to separate everything.
statics:
intensities
colors
positions
gobos
dynamics:
intensity chasers
color chasers
EFX:
...
In that way adding something to something other won't interfere with each other.
Take cue strobo0:
Inside all channels are present ... this is bad because you will rely on HTP and LTP priorities. (After pressing your flash button - the fixtures do not know what to do because they lack 'new' information.
If you had separate the statics and dynamics - the strobe function would ONLY set the intensity channel to strobe.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
Johnnyx
- Posts: 20
- Joined: Wed Nov 28, 2018 10:11 pm
- Real Name: Janis
Thank You for replay!
I'm beginner in lighting world and I try to lern.
That too I understud, everything need creat separate
Project is under construction and I build step by step.
Yes for my fixtures strobe is together with master dimmer, LED full off and full open,
DMX ch3:
0 - 7: Off
8 - 134: master dimmer
135 - 239 strobo (from slow to fast)
140 - 255 Open
probably I understand HTP&LPT
I was try experiment with HTP and LPT, but nothing to help
I'm beginner in lighting world and I try to lern.
That too I understud, everything need creat separate
Project is under construction and I build step by step.
Yes for my fixtures strobe is together with master dimmer, LED full off and full open,
DMX ch3:
0 - 7: Off
8 - 134: master dimmer
135 - 239 strobo (from slow to fast)
140 - 255 Open
probably I understand HTP&LPT
I was try experiment with HTP and LPT, but nothing to help