Install error? - qlcplus_raspbian_wheezy_20151018.img

[mattthomasdrums]

Hi, QLC+ Board people!
I've been having trouble getting 'qlcplus_raspbian_wheezy_20151018.img' to work on my Raspberry Pi 3 B+.
It always goes to a rainbow screen on boot.

I've tried the following and nothing seems to work:
- Downloaded & reinstalled image again
- Flashed image with Balena Etcher
- Flashed image with Pi Baker
- New SD Card
- Different Power
- Different Raspberry Pi 3 B+
- Added boot_delay

Different software images work fine, like Raspbian/RocketShow etc.
Is there something stupid I'm missing here?
Any help would be greatly appreciated.
Thanks,
Matt.

[mcallegari]

Is there something stupid I'm missing here?

You're 4 years behind the latest release!
If you donated in 2015, then you should have received all the emails of the images released (something like 8..)
Latest release is 20190825

[mattthomasdrums]

Ahhh... That's what I've done. My files were mixed up. I moved the wrong file on my hard disk to a different user account & somehow I didn't see that the image was 2015. Rushing to get it working. I will try with the 2019 image, instead of being an idiot!
Sorry for the stupid question.
Matt.