I am testing using version 20190217, using the image sent to me after making the donation. My use case is to have chasers running 24/7, with only RGB LEDs and no other fixtures.
When using a chaser that loops through multiple scenes, I find that the loop runs fine as long as there is no fade-in/fade-out between scenes. However, when using fade-in and/or fade-out functionality, I notice that the qlcplus binary crashes on the RPi after a few hours of operation. I also noticed that the %CPU used by qlcplus increases over time, until it eventually crashes. The CPU% is stable when there are no faders and the program does not crash. Perhaps this is unrelated and normal for faders? I see %CPU go up to 300% at times.
I ran the qlcplus binary with gdb to troubleshoot further. Attached below is the output from the crash after a few hours of running a chaser with faders.
gdb_output.txt- (2.28 KiB) Downloaded 44 times
I hope you can provide some help to resolve this issue. Please let me know if I can provide any clarification and/or more information regarding the issue. Looking forward to hearing back from you, thanks in advance!
