My setup travels between three venues with the same Virtual Console and a different Universe assigned to each venue that ties into the house lighting. Is there a way to map a given Output Line to the appropriate Universe in kiosk mode, or do I need to make three different copies of the same Workspace and patch the Output Line/Universe appropriately in each? I hate to do it that way since there's always a chance a change will be made to one of the Workspaces and the operator will forget to migrate it to the others.
Any other creative solutions?
Change Output Mapping in Kiosk Mode?
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
The 'patch' solution... called 'fixture remapping' https://www.qlcplus.org/docs/html_en_EN ... remap.html
You prepare everything in virtual universes = master copy.
Once at the venue you mess up your master copy by using the 'fixture remapping' possibility. Now only this copy will be messed up.
A change into the messed up file will NOT be reflected to the master-copy... sorry for that.
The operator has to keep notices of his changes which have to be done later in the master-file.
You prepare everything in virtual universes = master copy.
Once at the venue you mess up your master copy by using the 'fixture remapping' possibility. Now only this copy will be messed up.
A change into the messed up file will NOT be reflected to the master-copy... sorry for that.
The operator has to keep notices of his changes which have to be done later in the master-file.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
eamondaly
- Posts: 3
- Joined: Tue Aug 20, 2019 6:23 am
- Real Name: Eamon Daly
Thanks, but I don't think that quite hits the mark: remapping isn't available in kiosk mode, unless I'm missing something. It also presents the same issue as my current setup: if I have my employee run the show in non-kiosk mode, any changes they make might not get propagated properly.