I am looking for a ceiling mountable on-by-default light after powercycle that can also be controlled through DMX to switch it off.
It would be light if it could be flush cei8ling mount like this..
https://www.ebay.com/itm/DJ-Par-Light-P ... SwbF1blsvm
Any such thing exists ? It should be white only, but is ok if it is RGB.
Default On @ Powercycle DMX Ceiling light.
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Try to find a fixture where you can set it's state when there is no DMX signal present.
Set it to full white under the 'no DMX signal' condition.
After the system boots DMX signal will be present so the first thing to send is a full white scene. (Look for the green flag or the autostart function)
http://www.qlcplus.org/forum/viewtopic.php?t=9209
Set it to full white under the 'no DMX signal' condition.
After the system boots DMX signal will be present so the first thing to send is a full white scene. (Look for the green flag or the autostart function)
http://www.qlcplus.org/forum/viewtopic.php?t=9209
All electric machines work on smoke... when the smoke escapes... they don't work anymore