Tested with PARL-36DMX/CR. The /CR means Chrome finish so I would like to think the same fixture definition would work with other finishes.
Manual here:
https://www.manualslib.com/manual/12000 ... =11#manual
I have added aliases for the mode channels. Have I done them correctly? Is this triggering a bug in QLC+?
If I raise then lower channel 1 all looks good.
If I raise then lower channel 5 all looks good.
If I raise channel 1 then raise channel 5 then lower channel 5 then lower channel 1, the channel types go a bit wrong.
I think this happens because channel 1 affects the function of channels 2, 3 and 4 but channel 5 affects the function of channel 1 (and 2, 3 and 4).
If the problem isn't immediately obvious I'll try and explain it better and/or do some more investigation.
IMG Stageline PARL-36DMX
-
Andrew
- Posts: 60
- Joined: Tue Dec 20, 2016 10:06 pm
- Real Name:
- Attachments
-
IMG-Stageline-PARL-36DMX.qxf- (3.23 KiB) Downloaded 55 times
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Added, thanks