Mehrere Computer auf Showdaten zugreifen
-
cbymaz
- Posts: 2
- Joined: Fri May 31, 2019 6:55 am
- Real Name:
Is it possible that the data for a show can be used simultaneously by multiple computers? This would give you the opportunity to distribute the speed on at least two devices and in case of failure of one computer, the other could continue!
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Please translate the title in English.
This is an international forum, not a German one.
This is an international forum, not a German one.
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
QLC+ does not have built in fail-safe measures.
You could try with the use of a DMX merger (+€180?) but it will not be automatic
You could try with the use of a DMX merger (+€180?) but it will not be automatic
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
Austinrat
- Posts: 1
- Joined: Fri Aug 30, 2019 12:14 am
- Real Name: Austinrat
This is me being thick again,
Trying to set up a master / slave arrangement with 2 computers, I can set up the Midi IN side of things on the slave but how do I turn on and define the midi out strings for the Go etc buttons on the master computer?
Trying to set up a master / slave arrangement with 2 computers, I can set up the Midi IN side of things on the slave but how do I turn on and define the midi out strings for the Go etc buttons on the master computer?