X-touch
-
Krsound
- Posts: 142
- Joined: Sun May 31, 2015 4:42 am
- Location: USA
- Real Name: Kyle Sims
- Contact:
Will the xtouch full size work in a midi generic input profile or is there any work to make a input for it?
-
Krsound
- Posts: 142
- Joined: Sun May 31, 2015 4:42 am
- Location: USA
- Real Name: Kyle Sims
- Contact:
Ok I see where you can build a profile, if I build this profile which has about 150 inputs in it would be transferable to qlc5 when it’s up and running?
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Does the X-touch have motorised faders? I checked specs and uhu - they do.
Then it would be a job for Massimo to create a feedback solution I'm afraid.
And then this would mean that Massimo has to have one in his possession to really be able to debug.
If you could spare yours for some weeks : pay for shipment - you could help.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
OddSocks
- Posts: 152
- Joined: Tue Apr 14, 2015 11:33 am
- Real Name: Tim Cullingworth
The X-Touch extender works with it's motorised faders.
I did it's input profile and it was not to difficult.
Not sure how the X-touch works but if it has a midi function the faders should work.
The one bit that does not work is the scribble strips as these use SysEx messages.
I did it's input profile and it was not to difficult.
Not sure how the X-touch works but if it has a midi function the faders should work.
The one bit that does not work is the scribble strips as these use SysEx messages.