I need someone to help me with this error

Here you can share your fixture definitions with the community
Forum rules
Post Reply
Firzen
Posts: 2
Joined: Thu Mar 28, 2019 2:14 am
Real Name: Brian Emanuel Ruiz

I use this project and I get this error
the version I use is 4.12.1
If you know how to solve it, help me as much as possible, sorry for my English (use translator xd)
Attachments
LENTOS 10.qxw
(804.28 KiB) Downloaded 56 times
Atención 27_03_2019 22_59_37.png
Atención 27_03_2019 22_59_37.png (9.45 KiB) Viewed 528 times
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

the error says it all:

Unsupported sequences found; Please convert your project at ...
(there was a change sometime in the way sequences were stored inside the project file
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Firzen
Posts: 2
Joined: Thu Mar 28, 2019 2:14 am
Real Name: Brian Emanuel Ruiz

I did it, I ended up turning my proyect and that disappears but it follows the error that no fixture definition found :/
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

It says what is wrong: you need the fixture file for big LM 108 -> probably a custom made fixture definition.
Please try to think twice ...
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
Post Reply

Return to “Fixture definitions”