anyone know which DMX protocol the soundswitch interface uses? I know it's not officially supported but wondering if it's possible to use it with Q.
Thanks!
soundswitch dmx protocol?
-
mcallegari
- Posts: 4712
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Can you at least provide a link to the product page?
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Are there more than one DMX protocols?
I guess you mean 'what driver is needed to get the soundswitch working?' and 'is it supported by QLC+?'
It looks like it's a close combination of software (with connectors to several DJ-ing programs) and propriety hardware (although since the software has to be running I guess the DMX interface is made expensive to cover the costs for software dev.)
All it shows in spec is that the interface runs at 35Hz... (which is lightly off DMX spec)
I guess you mean 'what driver is needed to get the soundswitch working?' and 'is it supported by QLC+?'
It looks like it's a close combination of software (with connectors to several DJ-ing programs) and propriety hardware (although since the software has to be running I guess the DMX interface is made expensive to cover the costs for software dev.)
All it shows in spec is that the interface runs at 35Hz... (which is lightly off DMX spec)
All electric machines work on smoke... when the smoke escapes... they don't work anymore