Control through USB

Ask a question about the usage of QLC+ with the Linux operating system
Forum rules
Post Reply
zimbodel
Posts: 16
Joined: Mon Dec 31, 2018 9:16 pm
Real Name:

I cannot figure out how I can make QLightControl send commands to a USB port.
I see nowhere that I can select USB as the output device.
I am using a usb/485 converter to communicate with the DMX lights.

Anyone can help me ?
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

NO !

QLC+ uses 'certified' DMX interfaces
the interface changes USB device instructions to have the interface send out RS 485 signal trains respecting required DMX timing.

You cannot use a (native) RS485 device to send signals to DMX fixtures.
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
zimbodel
Posts: 16
Joined: Mon Dec 31, 2018 9:16 pm
Real Name:

Ok, where can I find the list of certified USB interfaces. A google search for "QLC+ 'certified' DMX interfaces" dopes not yield anything.
Anyone has a link to interfaces.
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

ow boy ... RTFM?
https://www.qlcplus.org/features.html
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
zimbodel
Posts: 16
Joined: Mon Dec 31, 2018 9:16 pm
Real Name:

Go oh boy yourself.
Top
Post Reply

Return to “Linux specific”