I hope this is the right place on the forum btw(sorry if it is wrong
).Thanks
!(sorry if I did some language error, English is not my mothertong)
adding patterns in a DMX laser
-
sounox
- Posts: 2
- Joined: Sun Dec 30, 2018 9:26 pm
- Real Name: antoine
Hi, i would like to know if it is possible ton add patterns to a dmx laser. I tried to find how on google but no luck. The laser don't a sd port. So is it possible in Q light controller+ or do i need an other soft to do that ?
I hope this is the right place on the forum btw(sorry if it is wrong ).
Thanks !
(sorry if I did some language error, English is not my mothertong)
I hope this is the right place on the forum btw(sorry if it is wrong
).Thanks
!(sorry if I did some language error, English is not my mothertong)
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
no and no and no
adding built-in patterns into a laser head is propriarity and needs a specific brand build program.
Has nothing to do with QLC+ or DMX in general
You can instruct your laser to use a pattern by DMX - nothing more...
adding built-in patterns into a laser head is propriarity and needs a specific brand build program.
Has nothing to do with QLC+ or DMX in general
You can instruct your laser to use a pattern by DMX - nothing more...
All electric machines work on smoke... when the smoke escapes... they don't work anymore