Add settings for Universe - Subnet, Net

[bottle]

Hi
I use ArtNet Nodes whith 4 outputs, but they are assigned to 1 Universe. I
If I choose 1 Universe, then
1 output is Universe 1, Subnet 1, Net 1
2 output is Universe 1, Subnet 1, Net 2
3 output - ...Net3
4 output - ...Net 4

I really like qlc, but for now I can only use 1 output ..
Can You add advanced settings for the Universes?

[mcallegari]

Can you please share a link to the product page ?

[bottle]

HALO brand,
it is not on the site now,
there is a version with 8 outputs

http://www.galo.com.ua/lighting/light_c ... 8_pro.html

[mcallegari]

Well, usually ArtNet nodes like that distinguish DMX universes with the ArtNet universe ID, which is already transmitted by QLC+.
Just select the node on each universe you intend to use and that's it. Have you tried that ?

[bottle]

I tried, only 1 output works.
This was their experimental model.
The controller has not web interface and has a static ip

[mcallegari]

That's weird.
Do you have a software that works with that device ?
If so, can you please capture with Wireshark the ArtNet network packets so that I can compare them to what QLC+ transmits ?

[bottle]

Yes,I connect it with jinx!
I'll try to deal with Wireshark
Thanks