I have the Enttec Playback wing connected to the network along with the ODE MKII ethernet to DMX adapter. In QLC+, the iMac is set to 192.168.4.1 and the MKII is at 192.168.7.1.
The playback wing is at 192.168.7.2.
I can access everything via browser, so I know everything is connected.
When I assign any key on the Playback wing to a toggle button, pressing that control double-taps the button immediately toggling it off. Likewise, the page up and down buttons on the playback wing increment by 2.
It's driving me insane.
Going out of my mind. Enttec Playback Wing Double-Entry
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
Never worked with the wing myself but:
* you have in universe 1 a profile selected saying Enttec wing
I think (not sure) that the Enttec wing option in input has to be selected (It says listening to port 3330) and there you have to assign the Enttec Profile
But I'm guessing now
* you have in universe 1 a profile selected saying Enttec wing
I think (not sure) that the Enttec wing option in input has to be selected (It says listening to port 3330) and there you have to assign the Enttec Profile
But I'm guessing now
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
arretx
- Posts: 46
- Joined: Tue Jul 10, 2018 5:47 pm
- Real Name: Jon Griffith
I'm not sure where you see port 3330.
On my screen I see:
Input: Playback at ::ffff:192.168.7.2
There's nowhere that I can set a port if that's something I need to do.
Before I even launch QLC+, when I press page up or page down on the controller, it advances by 2.
On my screen I see:
Input: Playback at ::ffff:192.168.7.2
There's nowhere that I can set a port if that's something I need to do.
Before I even launch QLC+, when I press page up or page down on the controller, it advances by 2.
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon