EFX controlling Fine Tilt & Fine Pan

[Samusic]

Hi, I'm trying to make a EFX whit 2 mini moving head, but when I play EFX, lights seems not to move. When I go to the "Mesa Simple" to see what's happening, I see that the faders that the EFX affect are de fine pan and tilt, instead of the principal Pan & Tilt faders. Is there any way to change the faders that EFX controls?

Sorry about my poor English

Best regards!

[janosvitok]

Can you post QLC+ version, and attach your QXW file and any custom QXF files here?
I suspect your fixture definition is wrong.

[GGGss]

It is definitely wrong.

* Open your fixture definition with the fixtureeditor
* Click on channels tab and find your pan channel...
( there can be 2 namely pan and pan fine)
* open one press edit channel
* verify that the pan channel has the course MSB control byte is set (right upper portion of screen)
* the same goes with the fine channel - but there the LSB control byte has to be set.
* do the same with tillt
* save

and retry your project (restart QLC+ to be sure that it reads the updated version)

(If there is no fine channel than your fixture works in 8 bit mode)