Change scene parameters in a slip

[EXELBONSAI]

As always google thank you ... translated via google

My setup
1x Beyond laser software (Artnet universum2)
1x Kvant Clubmax
1x QLC + 4.11.2

Intended to accomplish a mixed laser and lightshow via QLC (I find the DMX control via Beyond too complicated)
For this purpose, I have created a fixture which also creates the cue's and pages and colors as macros via function assistant. (Works great) (see picture 1)

Bild 1

Since there are many but also very useful switches, but not with the complete DMX values ​​to bring the laser to work at all are the following question.

In the picture 2 you can see shows the required DMX values ​​in the scenes.

Bild 2

In the picture 3 you can see the cues with the DMX values ​​created via macros.

Bild 3

The cue's DMX values ​​are controlled in channel 3. For the sides channel 2
How can I adjust the scenes in a slip with other values, ie channel 1 & 4-15 on the cue's & pages?
Copy and paste is not possible because the cues have to change constantly.

Or you can even install default values ​​on all channels in the fixture already?

I also add my fixture here

[EXELBONSAI]

Here is the fixture

Kvant-Clubmax-1800.qxf

(8.57 KiB) Downloaded 18 times

[EXELBONSAI]

I love this program more and more

I just found out that I can also mark individual channels in Scene Edit - copy and paste in another scene
Perfect..

If this is still somehow the changes in several scenes at the same time would be even more perfect.