DMX-AN not getting output!

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Locked
mykdw
Posts: 9
Joined: Tue Aug 21, 2018 12:49 am
Real Name: Mike Owens

Hello I am using the DMX-AN and I have used this interface with Lightkey and it works great. I want to try this software for the multiple universes but I am having lots of trouble. I have setup my interface, i thought correctly but I am not getting any output. It recognizes the interface and packets are being sent. It just feels like something is blocking the output... like my interface is not supported? Can someone please help me out? Here are some screenshots of my setup. I am not sure what I am missing here? Any help would be appreciated.
Attachments
Screen Shot 2018-08-20 at 6.32.29 PM.png
Screen Shot 2018-08-20 at 6.31.49 PM.png
Screen Shot 2018-08-20 at 6.38.11 PM.png
Top
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

You might need to set Universe to 1 and 2 (like in your device settings panel), and not 0 and 1.
Top
mykdw
Posts: 9
Joined: Tue Aug 21, 2018 12:49 am
Real Name: Mike Owens

I thought that too but when I try and change the universe from 0 to 1 it keeps reverting back to 0? Is this a glitch?
Top
mykdw
Posts: 9
Joined: Tue Aug 21, 2018 12:49 am
Real Name: Mike Owens

Well I am not really getting any help so I guess i am going to give up. too bad because it looks like it could be nice.
Top
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

Some settings are not saved until you save a project. Just create an empty one and save. Settings should stick in there.
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

See the other thread
and again ... set QLC+ to send to your 2.0.0.1 device (it needs unicasts, not multicasts)
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
mykdw
Posts: 9
Joined: Tue Aug 21, 2018 12:49 am
Real Name: Mike Owens

I have done that and I am still not getting anything I just don't know what I am missing. I know the interface works because if I switch over to lightkey it works fine. Here are some more screenshots:
Attachments
Screen Shot 2018-08-22 at 8.57.06 AM.png
Screen Shot 2018-08-22 at 8.56.40 AM.png
Top
User avatar
mcallegari
Posts: 4711
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

[moderator hat on]
Locking this one since A) doesn't help the community at all and B) there's a duplicate thread in usage questions.
Top
Locked

Return to “Community”