Dump DMX value to a function dont work

[Putte]

Hi . got a problem, got my self a couple of cheep chinese Lixada moving heads, https://www.dropbox.com/s/8q12i8rstputx ... a.GIF?dl=0, if i have master and red channel on in the simple desk and create an dump of dmx value i can add it to a chase but if i have master and channel 13 ( function combination) on and create an dump of dmx value to a chase or a button the chase will not work , the moving head will not move or light up, what are im doing wrong ?

[GGGss]

move has to do with pan / tilt channels
lightup has to do with 'fire lamp' (on traditional movers) intensity, diafragma settings and blinder, frost, closed gobo, etc ...
You cannot ask us for channel 1 and 13 is on => no light

then... if you 'dump' values to something and they don't work ... well maybe the values aren't right? Right?

IF in simple view you get some light ... then you dump, the dump will reproduce the same light.

[Putte]

Ok now im confused .. if i make a "dump" to a button , if i say it gonna be an flash function ( Only for sceens ) it works but if a say i ts gonna be a toggle funktion on/off nothing happens ,

[GGGss]

Just to be sure we understand each other: If, in the context of QLC+, we talk about 'dump' this is "Take a copy of all working functions and put these into a scene"
See https://www.qlcplus.org/docs/html_en_EN/dmxdump.html

What you are saying: you have a dumped situation to a button. In flash mode it works, toggle mode it doesn't work?

Please send your project so I (we) can check what is going on.

[Putte]

i have send you my workspace now

[GGGss]

To try I need your custom fixture also : Lixada 70W 4 in 1 (I can't find DMX chart for that one in 30 seconds)

Looking at simple Desk - flash and toggle do exactly the same (!!) No problem there
ch. 4 goes to 10, ch. 6 to 255 and ch. 8 to 58

I can't find any problems...

[Putte]

Hi i think i got it now, when i saved the workspace and start the aplication again it worked for me, strange ... //Patrik

[GGGss]

All problems situate inside your fixture definition ... and I'm quite sure you messed up with HTP and LTP channels.
But since I don't have the DMX parameters I can only correct what I think has to be done.

See annex (FAR FROM UP TO QLC+ STANDARDS)
problems:
* master dimmer and strobe ... where does dimming stop and where does strobing start?
* colour mixing needs all possible values defined
* colour mixing speed ... from S>F or ??
* function combination: unsupported in QLC+ v4
* reset does what exactly?

I've tried it with the 'new' fixture definition and now things look better. Replace your fixture file with mine and try.