Virtual Console: Control Moving Heads with XY Pad

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
Hanekawa
Posts: 2
Joined: Fri Jun 08, 2018 11:18 am
Real Name: Vivien Richter

Hello, dear Forum. :-)

I have two Moving Heads with two 10 DMX channels.
Both have one channel for tilt and one channel for pan.

Now i want to use the XY Pad at the virtual console of QLC+ to control move the heads.

I want to control both at the same time.
But one must be inverted.
For example, If the one head move to the left, then the other head should move to the right.

My Problem:
I don't understand, how to connect the x and y axis of this pad with the pan and tilt channels of the moving heads.


Please give me Dome advice.
Thanks, very much.



With best regards,

Hanekawa
Top
Hanekawa
Posts: 2
Joined: Fri Jun 08, 2018 11:18 am
Real Name: Vivien Richter

I have solved it.
The reason was a wrong fixture file.
The solution was to recreate a new suitable fixture file for my moving heads. :-)



With best regards,

Hanekawa
Top
Post Reply

Return to “Generic”