I did the fixture of the compact 7 sort of showtech but it does not work.
Can you help me?
thank you in advance
Showtec-Compact-Par-7.qxf- (7.05 KiB) Downloaded 90 times
Showtec Compact par 7 TRI
-
sonozikloc
- Posts: 9
- Joined: Wed Feb 03, 2016 3:52 pm
- Real Name:
Hello everyone,
I did the fixture of the compact 7 sort of showtech but it does not work.
Can you help me?
thank you in advance
I did the fixture of the compact 7 sort of showtech but it does not work.
Can you help me?
thank you in advance
-
vaiursch
- Posts: 1
- Joined: Tue Apr 18, 2017 1:40 pm
- Real Name:
Hi
What exactly does not work?
From a quick glance at the fixture definition, I can see that the 4-channel mode is wrong. The dimmer channel should be the first one.
I never bothered to make a fixture file for these as I use them with the General RGB fixture (I only use them in 3- or 4-channel mode).
With this you can check if your lamp is configured correctly.
What exactly does not work?
From a quick glance at the fixture definition, I can see that the 4-channel mode is wrong. The dimmer channel should be the first one.
I never bothered to make a fixture file for these as I use them with the General RGB fixture (I only use them in 3- or 4-channel mode).
With this you can check if your lamp is configured correctly.
-
sonozikloc
- Posts: 9
- Joined: Wed Feb 03, 2016 3:52 pm
- Real Name:
Hello,
Thank you for your answer, in fact it does not even turn on mode dmx so I'm looking for someone to give me a helping hand for the creation of this fixture ...
Thank you for your answer, in fact it does not even turn on mode dmx so I'm looking for someone to give me a helping hand for the creation of this fixture ...
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
You messed up with choosing the LSB (fine) values for almost all channels.
Fixed that.
And the use of the 8ch mode is not recommended since a value of one channel influences the function of another channel. QLC+ cannot handle that (and it's bad practise - the only reason why this is done is when people are using simple 8ch hardware desks. Messing up in channel 6 will alter channel 2 in 4 different modes)
Now it should work - and it came clear out of the fixture validator
Fixed that.
And the use of the 8ch mode is not recommended since a value of one channel influences the function of another channel. QLC+ cannot handle that (and it's bad practise - the only reason why this is done is when people are using simple 8ch hardware desks. Messing up in channel 6 will alter channel 2 in 4 different modes)
Now it should work - and it came clear out of the fixture validator
- Attachments
-
- Showtec-Compact-Par-7.qxf
- (7.3 KiB) Downloaded 78 times
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Added, thanks.
Actually, now we have aliases, so inter-dependent channels are handled
Actually, now we have aliases, so inter-dependent channels are handled