Hi, I need some help. When I activate i use a function with a button for example a LED light to be full Red it works great. But when I start another function for example the same LED PAR full GREEN. The already activated function RED remains and I end op in a mixture off RED and GREEN.
In my virtual console I can't select HTP (Highest take precedence) or LTP (Latest take precedence). How can I select LPT on a function or is there another way to solve this?
Regards, Frans
Function to overwrite current colors (LTP)
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
HTP and LTP won't change your setting.
If you don't instruct the red-channel to go dark - nothing will happen.
Or you have to stop the red function or you have to include the red-channel information inside the green function.
(in VC you could use a solo frame - then when you press the green function, the red function will be stopped automatically)
If you don't instruct the red-channel to go dark - nothing will happen.
Or you have to stop the red function or you have to include the red-channel information inside the green function.
(in VC you could use a solo frame - then when you press the green function, the red function will be stopped automatically)
All electric machines work on smoke... when the smoke escapes... they don't work anymore