Hello Guys,
i have a big problem by starting the rasp with QLC+ about 2 Universes.
If i connect about 2 Universes in the rasp my overall netwerk inkluded wlan is down and I can not do anything anymore
bevore i cut the line to the rasperry.
the rasperry must then be re-recorded because when I connect it to the network immediately the network completely fails.
When i start the universes on PC then it runs without problems.
I still have a desire to adjust in the program, I work with different pixels, unfortunately, not all settings to the color are possible, that is the drive in the same universe very disturbing.
RGB
RBG
BRG
BGR
GBR
GRB
Q Light Controller+
Official forums of the QLC+ project