Hi *
Just to notify: QLC+_4.11.1.89
Make a new project, add 4 simple dimmers to an RG Matrix, make a function, say fill,
convert the function to a sequence.
You will notice that:
a) the fixture will not be listed in the original order (i.e. 1, 2, 3, 4)
b) the values in the fixtures will have irritating values.
Thx.
Function to Sequence error
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
4.11.1.89 is from an experimental branch.
Does it work on 4.11.1.90 or is the issue still present ?
Does it work on 4.11.1.90 or is the issue still present ?
-
yokosuna
- Posts: 204
- Joined: Tue Mar 22, 2016 9:07 am
- Real Name:
Still there ...
... and in addition, the software creates a scene and names it after the matrix group.
If I delete the scene and switch over to the function editor, qlc will crash.
It´s also true for 4.11.0 with one difference: the order of the fixtures seems
not random but reversed.
And I noticed to when I run the matrix function with 76 as dmx value, the
created sequence will use 255 as dimmer values ...
HTH, Yoko
... and in addition, the software creates a scene and names it after the matrix group.
If I delete the scene and switch over to the function editor, qlc will crash.
It´s also true for 4.11.0 with one difference: the order of the fixtures seems
not random but reversed.
And I noticed to when I run the matrix function with 76 as dmx value, the
created sequence will use 255 as dimmer values ...
HTH, Yoko
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
I fixed it on GIT.
Please give version 4.11.1.100 a go
Please give version 4.11.1.100 a go