Chaser for GPIO Pins

All the topics related to QLC+ on the Raspberry Pi
Post Reply
PhiWie
Posts: 3
Joined: Wed May 10, 2017 3:51 pm
Real Name: Philipp

Hello Everybody,

I'm trying to Programm a Chaser for GPIO Pins. I can controll the Pins with the "Simple Desk" so the DMX Values and the Mapping in the Plugin works well.
But when I create Scenes for the Pins and put them Into a Chaser the Values of the Pins dont Change (I have tested it with the integrated "Monitor" Tool and with some LED's on the Pins).

How can i solve my Problem? :)

Thanks.
Top
janosvitok
Posts: 1331
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

Can you attach your qxw file?
How do you start the chaser?
Top
PhiWie
Posts: 3
Joined: Wed May 10, 2017 3:51 pm
Real Name: Philipp

Hello,

i have attached the .qxw File.
I start the Chaser with a Button on the Virtual Console.
Attachments
GPIO Chaser.qxw
(3.24 KiB) Downloaded 70 times
Top
PhiWie
Posts: 3
Joined: Wed May 10, 2017 3:51 pm
Real Name: Philipp

I still haven't fixed my Problem, any suggestions?

Thanks
Top
janosvitok
Posts: 1331
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

It seems that if you enable fading in the channel properties dialog, then it works. I don't have explanation for this (yet).
Top
Post Reply

Return to “Raspberry Pi”