I download and use al the test release.
But last week i have problem to control may moving head adj inno spot pro.
The XY pad not work the dmx value remain 0
I downgrade to release 10.6.xxx one of first test release an all ok
I buy new moving head yhatvhave 10 ch mode with onlu 2 channel pan e tilt and 15 ch mode in with the channel are 4 2 tilt and 2 pan
In 10 ch mode no problem in 15 ch mode pan ok pan fine ok tilt remain 0 tilt fino ok
Thank for answer
XY pad not work in all test release
-
janosvitok
- Posts: 1325
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
please attach your qxw and any custom qxf files (qxf that you created).
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
allready reported here : viewtopic.php?f=33&t=11064
XY-pad only sends to the fine-channels of pan and tilt
XY-pad only sends to the fine-channels of pan and tilt
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
pippozzo68
- Posts: 9
- Joined: Fri Apr 08, 2016 9:29 pm
- Real Name: massimiliano
Resolve
i have make an error in fixture definition
i have make an error in fixture definition