My HID interface.

This is a place for sharing with the community the results you achieved with QLC+, as a sort of use case collection.
You can share photos, videos, personal hardware/software projects, interesting HOWTO that might help other users to achieve great results.
Post Reply
asm
Posts: 58
Joined: Sun Jul 17, 2016 8:22 am
Location: Denmark
Real Name: Allan Madsen

Had a old joypad laying around, had to use the joystik for another project.
So used the rest for my own HID interface.

Made with SolidWorks.
1.jpg
My CNC machine process the g-code.
2.jpg
The finish work.
2 Sliders 2 Knop's 13 Buttons.
9.jpg
And it all works under QLC+ on a Raspberry Pi 3.
Top
User avatar
GGGss
Posts: 3052
Joined: Mon Sep 12, 2016 7:15 pm
Location: Belgium
Real Name: Fredje Gallon

Would you be so kind and share the schematics of the electronic components used?
All electric machines work on smoke... when the smoke escapes... they don't work anymore
Top
asm
Posts: 58
Joined: Sun Jul 17, 2016 8:22 am
Location: Denmark
Real Name: Allan Madsen

Hi.
There is no schematic, its from at old PS3 controller, and all knop, slider and buttons er soldret direct to the PCB from that controller (still waiting for my Teensy 2.0) When i get it i will share info on my blog.
Top
asm
Posts: 58
Joined: Sun Jul 17, 2016 8:22 am
Location: Denmark
Real Name: Allan Madsen

I am startet on a new project.
https://github.com/ddiakopoulos/hiduino ... output.ino
Iam using 4051 and 4067 chips.
I will bring pictures later.
Top
Post Reply

Return to “Community”