Hi all,
Newbie here, got a bunch of new fixtures in at work and simultaneously learning QLC+... seems to be quite intuitive compared to the Magic-Q setup we use.
Please let me know if I screwed anything up, I used another COLORbeam profile included in QLC+ as a template to build this one, so it should be good to go. It passed the online verification and I made sure to add every mode.
Edit: looks like it's common practice to link to the manual so added the manual below.
https://www.chauvetdj.com/wp-content/up ... ev2_WO.pdf
Cheers!
Chauvet COLORband T3 USB
-
iannault
- Posts: 1
- Joined: Wed Feb 08, 2017 3:14 am
- Real Name: Ian Nault
- Attachments
-
Chauvet-COLORband-T3-USB.qxf- (8.34 KiB) Downloaded 52 times
Last edited by iannault on Thu Feb 09, 2017 4:22 am, edited 1 time in total.
-
GGGss
- Posts: 3052
- Joined: Mon Sep 12, 2016 7:15 pm
- Location: Belgium
- Real Name: Fredje Gallon
off topic but never the less ... here also an official EX chamsys user 
After 20yrs strugling I found QLC+ -> wooow
(and now I use the wing to artnet to QLC - figure it out)
After 20yrs strugling I found QLC+ -> wooow(and now I use the wing to artnet to QLC - figure it out)
All electric machines work on smoke... when the smoke escapes... they don't work anymore
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Added, thanks.
@GGGss: please avoid off topic posts
@GGGss: please avoid off topic posts