Hi all,
Has anyone had experience with getting the Kam Liteobar 252 working with QLC+? The DMX channels are configured in a very wierd way that use the first channel to set the DMX style. If I set the first channel in the simple desk so that it is locked, I can get some functionality but it still acts strange with some colours staying on and it fading then flashing back on.
Any help will be appreciated.
Thanks
Issues with Kam Liteobar 252
-
janosvitok
- Posts: 1325
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
http://www.kam.co.uk/media/file/product ... -04-11.pdf
Did you create fixture definition? If yes, can you post here?
From the manual I'd guess that if you set CH1 to 80 (Dimmer1 @ full?), CH2 to 0 (no flash?) then you can use CH3-CH11 to set RGB for the three zones...
Did you create fixture definition? If yes, can you post here?
From the manual I'd guess that if you set CH1 to 80 (Dimmer1 @ full?), CH2 to 0 (no flash?) then you can use CH3-CH11 to set RGB for the three zones...
-
mcallegari
- Posts: 4711
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
Moved to another area, cause it had nothing to do with community stuff