Hi,
I have to par lights which have each their own way of doing strobe so i made a script setting each of one to fast strobe. I then assigned that function to a button and set the button to toggle. The strobe works but second time i push the button it does not shut down the strobe. It keeps on running. Do i really have to make two buttons ? I mean one for on and one for off or am i missing something ?
donnib
Can't get funtion to turn off (values to 0 dmx)
-
janosvitok
- Posts: 1325
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
Strobe channel uses LTP (latest takes precedence). These channels do not return back in QLC+ (at least for now).
Use two buttons in a solo frame to reset.
Use two buttons in a solo frame to reset.
-
djmg
- Posts: 14
- Joined: Thu Dec 08, 2016 2:10 pm
- Location: US
- Real Name: Matthew Greathouse
- Contact:
You can change your strobe channel on your fixture to HTP if you so desire. http://www.qlcplus.org/docs/concept.html#HTP . It can be changed per channel for a specific fixture, or a type of fixture from the Fixture Manager.
I have done this with a few of my fixtures due to the nature of the type of lighting i do. The ability to strobe a fixture with a momentary button has been beneficial.
I have done this with a few of my fixtures due to the nature of the type of lighting i do. The ability to strobe a fixture with a momentary button has been beneficial.