I don´t anderstand the adresses

Ask a generic question about the usage of QLC+, not related to a particular operating system
Forum rules
Post Reply
hmschreiber
Posts: 18
Joined: Wed Dec 02, 2015 6:49 am
Real Name: Herbert Schreiber

Hello,

I need again your help.

I have 8 LED Bars with 16 RGBW LED´s.

So at first I take them all as ficktures in my show. The adresses runs from 1 to 512 (each has 64 DMX Channels). Thats good.

Now I take the same to a RGB Matrix. 1-7 goes to Univers 1 and the last to univers 2.

Beside are to screen shots to explain. I cant´find the mistake or what I am doing wrong.

I need the Matrix for a show on weakend.

Thanks for help
matrix 2.png
matrix 1.png
Top
janosvitok
Posts: 1325
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

Hi,

I understand that instead of special fixtures you want to use rgb panel. Right?

Can you attach your qxw file here, so we can have a look at it?

Jano
Top
janosvitok
Posts: 1325
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

Herbert,

you don't need to post anything. You've found a genuine bug in QLC+. I've fixed it in git.
So either:
- open qxw file in text editor, and adjust the address of the last row (note that universes and addresses are zero-based, so universe 1 channel 449 is written as 0, 448)
- linux: compile from sources
- windows: grab the fresh QLC+ from https://ci.appveyor.com/project/mcalleg ... 4.10.5.252 once it is built

Jano
Top
hmschreiber
Posts: 18
Joined: Wed Dec 02, 2015 6:49 am
Real Name: Herbert Schreiber

thanks a lot.

Thats a great help.

I will test it.

best wishes and a nice Christmas to all.

herbert
Top
hmschreiber
Posts: 18
Joined: Wed Dec 02, 2015 6:49 am
Real Name: Herbert Schreiber

Hi,

it works. thanks.
Top
Post Reply

Return to “Generic”