Hi All,
I am just experimenting with using loopback to show the active state of a slider and for some reason can't assign an external input. I have tried a number of workspaces including some example ones I found in the forums.
Not sure what I have done wrong or it is a bug?
Attached is a brief movie of the situation.
Cheers
Mark
QLC+ 10.3.a
Mac OSX 10.11.3
Can't assign External Input
-
mlohrey
- Posts: 243
- Joined: Mon Apr 20, 2015 5:07 am
- Real Name: Mark Lohrey
- Attachments
-
- loopback error.mp4.zip
- (217.18 KiB) Downloaded 78 times
-
mlohrey
- Posts: 243
- Joined: Mon Apr 20, 2015 5:07 am
- Real Name: Mark Lohrey
Thanks for the help, plugz
I thought I doing something wrong.
I had tried adding a channel number but it didn't work. I have since discovered you have to be quite careful when you add the channel number.
I had clicked off the line that has the channel number and that is when the trouble started!
I have attached another video to show the wrong way and then finally the correct way....
I thought I doing something wrong.
I had tried adding a channel number but it didn't work. I have since discovered you have to be quite careful when you add the channel number.
I had clicked off the line that has the channel number and that is when the trouble started!
I have attached another video to show the wrong way and then finally the correct way....
- Attachments
-
- correct way.mp4.zip
- (822.28 KiB) Downloaded 112 times