Velleman K8062
-
janosvitok
- Posts: 1330
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
By looking at the sources, Velleman seems to be currently supported only on Win32. No linux, no mac os x, no win64.
See also: http://www.qlcplus.org/docs/vellemanoutput.html
However: by reading the dll sources at http://www.velleman.eu/support/downloads/?code=K8062 it looks like the velleman is a HID device with VID=0x10CF and PID=0x8062,
so with a little experimentation, most probably it could be supported even without their dll -- meaning all systems.
Since someone must write the code, I can't give you any estimation.
See also: http://www.qlcplus.org/docs/vellemanoutput.html
However: by reading the dll sources at http://www.velleman.eu/support/downloads/?code=K8062 it looks like the velleman is a HID device with VID=0x10CF and PID=0x8062,
so with a little experimentation, most probably it could be supported even without their dll -- meaning all systems.
Since someone must write the code, I can't give you any estimation.
-
mcallegari
- Posts: 4807
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
It's not a HID device (otherwise it would appear under the HID plugin devices, right ?)janosvitok wrote:However: by reading the dll sources at http://www.velleman.eu/support/downloads/?code=K8062 it looks like the velleman is a HID device with VID=0x10CF and PID=0x8062
I just assembled one and I will probably add the Linux support in the next weeks
-
janosvitok
- Posts: 1330
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
Note that OLA seems to support the device, so you may have luck using ola plugin.