No DMX Output from MAC El Capitan 10.11.2 ENTTEC OpenDMXusb

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
arcturus
Posts: 1
Joined: Sat Jan 02, 2016 9:07 pm
Real Name: Luc Arcturus

Hello,

I have a Mac El Capitan 10.11.2 and an USB device ENTTEC opendmx usb. I viewed the 4 first video tutorials, read the manual and read the topics here concerning this problem on the forum. I also followed the advise of Massimo on this forum concerning uninstalling FTDI Drivers on OS X.

After two days work, there is no light coming on my Showtec Compact PAR 18 MKII!! I am quite desperate (but not a housewife :-))

Could you please help me to solve the problem.

Thank you very much in advance.

Luc

NB: When the light will come ;-) i will also need a fixture for an Ibiza Lights Laser LASRGBYP-5
Top
Rapsodie
Posts: 7
Joined: Thu Nov 12, 2015 8:39 pm
Real Name:

Hello,

I have the same problem!

I wanted to use Enttec open dmx usb on my macbook with el capitan 10.11.1 - but it doesn`t work...

Please, could you help us?

Regards,

Rasodie
Top
martydj
Posts: 5
Joined: Sun Dec 27, 2015 6:01 pm
Real Name: Martino

Try to uninstall and reinstall qlc. One day I have had the same problem and I have done thus. But the SO is not 10.11.2
Top
Rapsodie
Posts: 7
Joined: Thu Nov 12, 2015 8:39 pm
Real Name:

Hi again,

thank you for your help!

But unfortunately, it didn`t help...

My DMX-interface is listed in QLC+, but it doesn`t work...

Do you have any other ideas?


Regards,

Rapsodie
Top
gmint
Posts: 121
Joined: Wed Apr 15, 2015 8:04 pm
Real Name: George Qualley IV

I was under the impression that the Open DMX is not working under 10.11 (without some fairly serious hacks, anyways) at all. Unless something has changed, I know this was the case when 10.11 came out. I have both Open DMX and DMX Pro units and while the Pro works fine, the Open DMX shows up correctly (as others have experienced) but no DMX is sent. I've held off on upgrading to 10.11 on my machine that has only an Open DMX unit for that reason. If someone does have it working, I'd love to hear...
Top
Rapsodie
Posts: 7
Joined: Thu Nov 12, 2015 8:39 pm
Real Name:

Hi,

it seems to be a QLX-Problem with the ENTTEC OpenDMXusb only on a mac.
Yesterday, I tried the ENTTEC interface with my daughters windows-laptop and QLC+ - and it worked fine!
I really don`t know how I can get it to work with the macbook.
But I need a running system.
So ENTTEC DMX PRO is working with OSX 10.11.1?
Perhaps I should buy this one?

I contacted the ENTTEC - support, but they couldn`t help and they said that its a QLC+ - problem.
Any ideas?

Regards,

Rapsodie
Top
chris-j-d
Posts: 2
Joined: Mon Jan 11, 2016 11:19 pm
Real Name: Chris Danneffel

Is the problem solved in the meantime? Because her it's the same thing: ENTTEC Open DMX gives no output to the lights when it is used with either iMac 7 or MacBook. Everything goes fine with XP or WIN10.

See viewtopic.php?f=5&t=9394
Top
Mihai Andrei
Posts: 77
Joined: Sun Sep 27, 2015 10:58 am
Location: Italy-Arezzo
Real Name: Mihai Andrei
Contact:
Contact Mihai Andrei

Hi. The Open ENTTEC perfect working on El Capitan 10.11.3.
Top
gmint
Posts: 121
Joined: Wed Apr 15, 2015 8:04 pm
Real Name: George Qualley IV

Mihai Andrei wrote:Hi. The Open ENTTEC perfect working on El Capitan 10.11.3.
How exactly?
Top
User avatar
mcallegari
Posts: 4876
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:
Contact mcallegari

gmint wrote:
Mihai Andrei wrote:Hi. The Open ENTTEC perfect working on El Capitan 10.11.3.
How exactly?
Like this
viewtopic.php?f=5&t=8434&p=40820&hilit= ... tan#p40820
Top
gmint
Posts: 121
Joined: Wed Apr 15, 2015 8:04 pm
Real Name: George Qualley IV

Ah, that's helpful, I hadn't seen that thread and was under the impression that there still wasn't any way to do this without basically disabling the kernel protection.
Top
Post Reply

Return to “Archive - no new threads please”