HILFE TOUCH OSC

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
Pongo112
Posts: 2
Joined: Fri Jan 29, 2016 1:08 am
Real Name: Sebastian

Hallo ich bin ein Anfänger mit der Software und habe mir jetzt soweit alles angelernt mit einstellungen habe
auch schon meine eigene OSC Oberfläche geschaffen und Funktioniert auch einwandfrei auf meinem IPad
und auf meinem Iphone.

Jetzt die Spannende Frage wie bekomme ich es hin, das die Rückmeldung welche das Programm sendet auf mein Ipad wenn Tasten belegt sind paralel zum Iphone und Umgekehrt funktioniert.

Ich hab mir jetzt schon 3 nächte um die Ohren geschlagen und bin jetzt echt verzweifelt.

Hoffe mir kann hier jemand helfen ich denke es is einfach nur ne einstellungssache.

Bis dahin Vielen Dank :-)

Sebastian
Top
plugz
Posts: 637
Joined: Sun Apr 12, 2015 6:30 pm
Real Name: David

Hello,

This is an english-speaking forum, please use english.

This way everyone will be able to understand you.

Thank you.
Top
janosvitok
Posts: 1331
Joined: Mon Apr 13, 2015 7:05 am
Location: Bratislava, Slovakia
Real Name: Jano Svitok
Contact:
Contact janosvitok

If I understand correctly you have created TouchOSC setup for both IPad and Iphone, and when you use them together,
the feedback is crossed (how? I don't really understand).

For start, please post your qxw file.
Make sure you have separate universes for IPad and IPhone (they may share the same OSC profile if the configuration/widgets are the same)
but you must have them on separate universes.
Top
joky
Posts: 18
Joined: Tue Jul 07, 2015 5:18 pm
Real Name:

so sending commands from touchosc from iPhone and iPad work, right?
Feedback to iPhone OR iPad also works, right?
Now you want QLC+ to send feedback to both devices simultanous, right?


you can use the software oscrouter between QLC and your iOS devices. Maybe it works also using the loopback plugin (universe 1: feedback to iphone, output to loopback, universe 2: input from loopback, output to your dmx transmitter). I tried none of those solutions.

As oscrouter is not available for linux I'll try the loopback solution the next days. Let me know how you're progressing!


Update: The following setup works in dry run:

1.) Fixtures, scenes etc setup in Universe 1
2.) Universe 1 - Output to Loopback 1
3.) Universe 1 - Feedback to device 1
4.) Universe 2 - Input from Loopback 1
5.) Universe 2 - Output to DMX Output
6.) Universe 2 - Activate Passthrough

regards
Top
Post Reply

Return to “Archive - no new threads please”