[solved] Channel stays at previous value

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
joky
Posts: 18
Joined: Tue Jul 07, 2015 5:18 pm
Real Name:

Hi guys,

I've a 1-channel DMX Fogger (self created fixture) with 2 scenes in QLC+ 4.10.3 (GIT) on linux:
Heater ON - DMX-Value: 20
Fog ON - DMX-Value 255
The Fog ON is a Flash button and works as expected, the Heater-Button is a toggle-button.


When I turn off the heating-button the output still stays at 20.

The "Stop ALL functions" button is inactive. The simple desk shows the fader at value 20, but the clear "Reset this channel"-button below also doesn't set the channel back to zero.



Anyone knows this problem and/or solution?

all the bests!!
Last edited by joky on Thu Jan 28, 2016 10:41 am, edited 1 time in total.
Top
plugz
Posts: 637
Joined: Sun Apr 12, 2015 6:30 pm
Real Name: David

http://qlcplus.org/forum/viewtopic.php?f=5&t=9482
Top
joky
Posts: 18
Joined: Tue Jul 07, 2015 5:18 pm
Real Name:

solutions are sometimes so close,.. missed that topic - thank you!
Top
Post Reply

Return to “Archive - no new threads please”