It sounds like people are reporting two problems here - something to do with channel group values (which I've not experienced) and problems with channels getting set to zero after saving if they are used in a scene.
Here's a video using 4.10.2b showing the problem. I add a single fixture, single scene, saved the file, re-open - everything is OK. Add the scene to a show, save, re-open and the channel values are back at zero.
Video: https://www.dropbox.com/s/kog88xc2kb2u7 ... s.mov?dl=0
Workspace: https://www.dropbox.com/s/av1gxbaqz1e83 ... d.qxw?dl=0
I've also tried the exact same thing with QLC+_4.10.3-TEST-20160120.dmg and confirm this issue is NOT YET FIXED.
Many thanks to everyone working on this, it's a fantastic piece of software.
Regards, Jonathan
Not remembering channel group levels
-
badgermanus
- Posts: 21
- Joined: Tue Apr 28, 2015 4:24 am
- Location: San Francisco
- Real Name: Jonathan Wilson
OSX, AKAI APC Mini, generic USB/DMX
-
willmodelisme
- Posts: 53
- Joined: Wed Jan 20, 2016 7:50 pm
- Location: PARIS France
- Real Name:
I will let you re-open the new thread badgermanus but I want to add a point about the issue before:
-when I play the show, the scenes channels get back to saved value as soon as they are read.
Tell me if you have the same.
-when I play the show, the scenes channels get back to saved value as soon as they are read.
Tell me if you have the same.
Enttec DMX USB Pro
Windows 10
Windows 10
-
badgermanus
- Posts: 21
- Joined: Tue Apr 28, 2015 4:24 am
- Location: San Francisco
- Real Name: Jonathan Wilson
OSX, AKAI APC Mini, generic USB/DMX