i am testing and configuring a RPi 2 and the Rapberry 7" touch screen, when switching to smiple desk it scales outside the screen. the only way i found to get it back fitting the screen is a reboot, is this a bug?
after boot
clicking simple desk
after clicking simple desk
Scaling issue simple desk
- mcallegari
- Posts: 4807
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
This topic has been discussed in the forum quite a few times.
If you are using the Raspberry Pi touchscreen, it would have been nice if you mentioned it...
You need to reduce the number of faders in the Simple Desk page, documentation here (see 4.1): http://www.qlcplus.org/docs/parameterstuning.html
This is the relevant post specific to the Pi:
viewtopic.php?f=7&t=8902&start=20#p39643
You probably need to reduce the playback faders as well ('playbacksperpage')
If you are using the Raspberry Pi touchscreen, it would have been nice if you mentioned it...
You need to reduce the number of faders in the Simple Desk page, documentation here (see 4.1): http://www.qlcplus.org/docs/parameterstuning.html
This is the relevant post specific to the Pi:
viewtopic.php?f=7&t=8902&start=20#p39643
You probably need to reduce the playback faders as well ('playbacksperpage')