Osc bridge and overscan issues

Archive of the non-categorized posts related to the QLC+ technical support.
Please do not create new threads here, instead, use the categories above !
Post Reply
Sqeegie
Posts: 15
Joined: Thu Dec 17, 2015 4:15 am
Real Name: Ryan J

I have 4.10.2a on OS X El Capitan and whenever I load a show and go from virtual console to simple desk the entire app overscans my 13" screen and have to continually move the app around to get to the channels as well as go into operating mode. Is there a way to fix this?

The other issue I am having is I am using touch Osc bridge and am connected to my MacBook Pro, I cannot seem to get any inputs to read. It used to work prior to El Capitan a long while ago but now I can't. What am I doing wrong?
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

First, please use 4.10.2b. It includes some more fixes than 4.10.2a

Secondly, what you ask has already been discussed several times in this forum.
See this: viewtopic.php?f=5&t=8846

Do you see the blinking joystick in the Input Output panel when transmitting OSC data ?
Sqeegie
Posts: 15
Joined: Thu Dec 17, 2015 4:15 am
Real Name: Ryan J

mcallegari wrote:First, please use 4.10.2b. It includes some more fixes than 4.10.2a

Secondly, what you ask has already been discussed several times in this forum.
See this: viewtopic.php?f=5&t=8846

Do you see the blinking joystick in the Input Output panel when transmitting OSC data ?
Thank you! As for the OSC, I do not see a joystick in the output panel.
User avatar
mcallegari
Posts: 4827
Joined: Sun Apr 12, 2015 9:09 am
Location: Italy
Real Name: Massimo Callegari
Contact:

Sqeegie wrote:Thank you! As for the OSC, I do not see a joystick in the output panel.
Then the QLC+ OSC plugin is not configured properly. Check the IP address and the port
Sqeegie
Posts: 15
Joined: Thu Dec 17, 2015 4:15 am
Real Name: Ryan J

mcallegari wrote:
Sqeegie wrote:Thank you! As for the OSC, I do not see a joystick in the output panel.
Then the QLC+ OSC plugin is not configured properly. Check the IP address and the port

Ok, I will double check again. And that goes with using the TouchOSC bridge too. I haven't been able to get that to work either on it.
Post Reply