audio Inout Question
-
Ham
- Posts: 46
- Joined: Sun Aug 23, 2015 12:43 am
- Real Name: Ham Sadler
Is it possible to map the internal audio to the input of qlc+? I am using 4.10.1 and can see the microphone as an input and the earphone/ speaker as output. What I want to do is use the audio playing on the same computer that isrunning QLC+ to trigger audio events in an audio trigger widget. In the Audio tab of the IO I can't route the speaker to the input.
- Attachments
-
-
janosvitok
- Posts: 1331
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
Currently it is not possible. You have to achieve that somehow outside of QLC+
-
janosvitok
- Posts: 1331
- Joined: Mon Apr 13, 2015 7:05 am
- Location: Bratislava, Slovakia
- Real Name: Jano Svitok
- Contact:
What's your OS?
-
mcallegari
- Posts: 4827
- Joined: Sun Apr 12, 2015 9:09 am
- Location: Italy
- Real Name: Massimo Callegari
- Contact:
From the screenshot it seems like Windows.
A quick research shows that JACK should be the one to be used (yes, they ported it on Windows and OSX too
)
http://www.jackaudio.org/
A quick research shows that JACK should be the one to be used (yes, they ported it on Windows and OSX too
)http://www.jackaudio.org/
-
Ham
- Posts: 46
- Joined: Sun Aug 23, 2015 12:43 am
- Real Name: Ham Sadler
I'll try the Jack, but probably I'll hook up my Roland Octacap ture and use the output from it. Unfortunately, I am busy with a Christmas fashion show and some music gigs so I don’t have much time to experiment . Life would be a lot simpler if I didn't have to go to work to pay for all my toys!